A chain link fence is a good choice when you want a barrier fence to keep dogs in the yard but you don't want a privacy fence. Chain link fences are also affordable, and since they aren't complicated to install, they go up fast. The length of time depends on the size of your yard, but if you have a typical small yard, the job could be completed in a single day unless the contractor wants to allow an additional day to let the concrete in the post holes cure. Here's a look at the process of installing a chain link fence.
The Preparation Phase
You should look into local regulations before you decide to install a fence. Learn if there are codes that regulate the type of fence and its height. Find out if you need a permit or survey first. If this is the first fence on your property, then a survey might be a good idea to make sure the fence has the right placement. Also, find out if you need utility lines marked since there will be digging involved.
During this phase, you'll also need to pick out the fencing and choose the fencing contractor to install it. The contractor will provide an estimate based on the length of the fence, order the supplies, and schedule a date for the installation. If you have bushes or overgrowth in the area, cut them down so the work area is free of obstructions when it's time to put up the fence.
Set Posts In Holes
Chain link fence installation begins with digging holes to hold the posts. The fence will have end and corner posts that are thick and study and topped with caps along with smaller line posts. The end and corner posts are usually installed first and sunk in concrete for stability. At this point, the contractor may wait a day for the concrete to cure and hold the post steady since the chain link mesh has to pull against the posts when stretched to make the fence.
Build The Frame
The next step is to build the frame of the fence. This involves putting on the caps, attaching the top rails, and putting tension bands on the corner and end posts to pull the mesh tight. The gate is also assembled at this point so it is ready to attach to the fence.
Attach The Mesh
The mesh for a chain link fence comes in a big roll, and it's pulled across the frame and tightened to get rid of slack. This is done by attaching the mesh to the tension bars and stretching it with a fence puller. The top of the mesh is attached to the top rail of the frame with ties, and the bottom is attached with hoop rings or a tension wire.
While this is an overview of the installation process, there are many small details a contractor has to address, such as making sure the fence is level and that the gate swings freely. Once the installation is complete, your new fence is ready to handle a large dog or playful kids, and the fence should last for many years since chain link is so durable. Contact a fence company like A Better Fence Company to learn more.