3 Types Of Materials To Consider For Your Deck Installation

If you have made the decision to have a deck installed to your property this spring or summer to boost your home value and increase visual appeal while also adding extra functional space for your family and guests, then you need to make sure that you choose the right material for it. There is an assortment of materials that can be used for your new deck, but some materials are able to stand the test of time better than others. Here is a look at three types of materials that are better suited for your deck installation.

Pressure Treated Lumber

If you are on a budget but still want to have a relatively decent material for your deck installation, you may want to consider pressure treated lumber—which is also a material that is easy to work with if you decide to do a DIY install. Generally, pressure treated lumber is manufactured with yellow pine and can withstand the elements well. While this particular type of wood is treated to resist pest and water damage, it is important that routine maintenance be performance to avoid warping and cracking.


Redwood is praised for its rustic appeal and rich color, which is why it is a very popular choice for siding replacements as well as deck installations. As a softwood, redwood is naturally engineered to resist damage from insects and erosion. If you want to get your hands on the best redwood, you will want to source it from the center of the redwood tree. To preserve the wood's color, make sure that the wood is stained after it is installed, and to extend the wood's lifespan, power wash it once annually.


If you have money to splurge and want to go outside the box, you may want ot consider opting for an exotic material for your deck installation like tigerwood. With this type of wood, colors vary from light brown to reddish-brown with streaks of brown or black throughout. This wood is very attention-grabbing, but the installation itself can be very time-consuming. While it is not impossible, it is difficult for the wood to be penetrated with nails and screws, which means that the surface must be bored prior to the planks being attached.

If you would like to learn more about these materials or other materials that can be used for your upcoming deck installation, reach out to a contractor in your area today.